Explosion Proof Flashlights

Explosion-Proof Low-Voltage LED Work Light has 100 ft cord.

July 27, 2011 - Along with 12 V, 7 W LED lamp and integrated cord reel, Magnalight EHL-LED-120X12-100 hand lamp has inline transformer to step down 120 Vac current to 12 Vdc for low-voltage applications. Light is Class 1, Division 1 rated for Groups C and D, providing users in hazardous locations with low-voltage source of LED illumination. Included 100 ft of SOOW cord promotes mobility, while contrast and color rendering produce true color and sharp definition for close work and inspection. Magnalight.com by Larson Electronics has released a low voltage version of its 7 watt LED work light with integrated cord reel that incorporates an inline power transformer to step down common 120VAC current to 12VDC for low voltage applications. Producing more light than a 100 watt incandescent hand lamp, the Magnalight EHL-LED-120X12-100 hand lamp provides operators in hazardous locations with a low voltage source of high quality LED illumination. Class 1, Division 1 rated for Groups C and D and suitable for locations where flammable vapors and gases are present; this LED hand lamp includes 100 feet of SOOW cord for ample light mobility. Designed to provide a low voltage light source of exceptional brightness, the EHL-LED-120X12-100 incorporates a 12 volt, 7 watt LED lamp and inline power transformer to produce a low voltage LED light source surpassing 100 watt incandescent lamps in both brightness and light quality. Constructed of steel and aluminum, this explosion proof LED hand lamp is Class 1, Division 1 rated for Groups C and D and certified to CSA standard C22.2 No. 12 and CSA standard C22.2 No. 137. The light produced by this low voltage explosion proof drop light is much whiter and brighter than a typical 100 watt incandescent equipped drop light. The good contrast and color rendering of this units' LED lamp produces truer color and sharper definition for more effective operation during close work and inspection activities. 100 feet of included SOOW cord ending in a straight blade plug allows users to easily connect to standard wall outlets outside of the hazardous work area, yet still have enough length left for good mobility. Suitable for damp areas and indoor or outdoor use, this work lamp is very durable, with an LED lamp that resists damage from impacts or vibrations and a housing constructed of epoxy coated steel and bare aluminum for added protection. A rubber bumper guard and aluminum swivel hook allows this lamp to be hung from suitable objects without damage from bumping or rattling. The included inline power transformer allows this 12 volt unit to operate from 110-120VAC and is sealed to resist intrusion from water and other contaminants. The low voltage operation and 7 watt LED lamp in this unit results in a cool running drop light that won burn the skin if accidentally touched as would happen with an incandescent drop light. "For applications where operators need Class 1 Division 1 and Class 2 Division 1 low voltage LED lighting with high light output, this durable aluminum trouble light is ideal," said Rob Bresnahan with Larson Electronics' magnalight.com. "Our standard 120V version of this LED trouble light is extremely popular with aerospace operators, grain elevator inspectors and a variety of tank and vessel workers. Combined with a 50,000 life hours, low amp draw, no heat production and no need to change the bulb, operators should find this light applicable for most hazardous locations areas." (TNN). TNN is a comprehensive source of new and timely product information in the industrial marketplace. TNN supplies new product information to the web sites, e-marketplaces and print publications that serve the industrial marketplace. For press release submissions please go to http://news.thomasnet.com/submitpr.html . BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE AGREEMENT .

The Explosion Proof Rechargeable LED Flashlight - Bonix Flashlight

The Explosion Proof Rechargeable LED Flashlight has three settings and can be toggled between light levels using the multi-function on/off switch. Simply pressing the switch once activates the light in high mode to produce a powerful 130 lumen light beam and 4 hours of runtime. Holding the switch down activates the light in low mode and produces a smaller 50 lumen light beam that will last for up to 12 hours. Extreme runtime is produced by holding the switch down for ten seconds which activates the flashlight’s dim mode, producing a very mild 1.3 lumens of light that can provide a runtime of up to 480 hours.

The explosion proof flashlight LED flashlight comes with a mountable charging base that can be attached to walls or flat surfaces. This allows the user to mount the entire flashlight and charger as a unit in locations the user finds the most convenient. The charging unit acts as a holder and the user simply snaps the light in and out of its charging base as needed. This is highly convenient in areas where operators regularly enter and exit hazardous locations to check on operations or conditions and need a portable source of illumination. Simply mount the unit to a wall near the most visited area and operators can easily grab a ready to use charged source of explosion proof lighting when they enter the work space. Also included with this flashlight are 2 charging stands and two cords. Attach one of the charging cords to the stand to gain power then snap the LED flashlight into the charging stand to begin charging the flashlight. A 120V wall plug cord (VAC) and 12V vehicle cigarette plug cords (VDC) are both included.

Air & space Smithsonian

If that's the case, engineers may be thankful they had not peered into the vent with one of those non-explosion- proof flashlights. ...

Popular Science

Servicing a water- or explosion-proof flashlight should also include inspection of the gaskets. If a light has a defective gasket or cracked lens, ...

Powerboat Care and Repair, How to Keep Your Outboard, Sterndrive, Or Gas-Inboard Boat Alive and Well

You can't do much mechanical work on board a boat without a flashlight. No matter what brand you choose for your main flashlight it must be explosion proof ...

Preparedness Now!

Make sure to buy a non-incendive (explosion- proof) flashlight. Most waterproof flashlights are explosion-safe, but you should check to be certain. ...

Federal supplement

... in refusing to install explosion-proof lights or a sprinkler system. ... consider the effect of plaintiffs use of a light bulb instead of a flashlight. ...